 |
|
|
|
The SpJ Lyla pick-up arm has been designed in the manner of a precision instrument, and has been manufactured to extremely fine tolerances out of materials chosen to insure neutral and accurate playback of analogue records. The SpJ Lyla pick-up arm is made of Titanium; it is a uni-pivot " I "- shape design that places the stylus tip in a straight line with both the arm wand longitude and the arm's pivot. The SpJ Lyla carries a minimal lateral mass.The SpJ Lyla Offset-Angle is appropriate for an effective length of 312-mm - according to the classical Bærwald tone arm geometry calculation, which places the Null Radii at 66 and at120.9-mm from the turntable's spindle center.• VTA height setting is made possible even as the stylus tracks the grooves.• Spindle to pivot gauge to set the arm's pivot distance from the turntable spindle is supplied.• Gauge to set the stylus effective length is also supplied.• Template engraved with Bærwald two Null Radii, to check setting of the cartridge offset angle is supplied with the SpJ Lyla. The template can also be used to check setting of the cartridge azimuth. • The SpJ Lyla pick-up arm may be used with cartridges weighing from 3 to more than16 grams, due to add on or interchangeable stainless steel counterbalances. PO Box 272, New York, NY 10024 Phone: (212) 579-4352 |